by Benjamin Adner
The concept of computer-to-plate (CTP) is not new in the printing industry and is now used on a daily basis in the offset and flexography industries. The screen printing marketplace also has seen substantial growth in the use of direct-to-screen systems; however, in the pad printing arena, the concept and equipment for CTP are still very new (although are coming on extremely strong). With recent machine developments and improvements, laser plate engraving systems are beginning to take a significant hold in this area, and the market appears to be ready for a total conversion over the next couple of years.
CTP systems, as they apply to pad printing, enable the user to take a digital graphic file and by means of a laser, make high quality pad printing plates (clichés) without the use of film, exposure systems, or chemicals. Advancements to the process, increased efficiency, direct cost savings, and superior imprint quality have produced such dramatic improvements over other existing technologies that those who have seen the results become instant converts.
Computer-to-Plate Benefits
Over the past few years, advancements to the overall CTP process have produced highly effective results. Among these results are the following benefits:
• Improved print quality – laser graphics are first generation so there is no loss of resolution. Plates made using film are second generation.
• Plate making is totally repeatable – plates can be made the same every time.
• Plates can be made with “combination etching” – halftones for bold areas and open etch for fine graphics.
• Improved ink lay down – laser-engraved plates have a straight walled etching and more precise inkwell than polymer, thin, or thick steel plates.
In addition, because the CTP process requires less consumable materials, CTP users are able to enjoy a number of cost saving benefits:
• Reduce plate usage – double-sided laser plates can accommodate up to four images.
• Laser plate costs are similar to polymer clichés.
• Eliminate film costs – image-setter or laser film.
• Eliminate chemical costs – fixer, developer, and plate toner cartridges.
• Eliminate supply shipping costs and hazardous material removal.
• Eliminate maintenance contracts on processing equipment.
Finally, as far as a savings in time and efficiency are concerned, computer-to-plate systems offer a number of benefits that directly affect the bottom line:
• Improve plate throughput – it takes 3-5 minutes to etch a laser plate (10 minutes for steel) versus approximately 15 minutes for a polymer plate.
• Eliminate bad plates – complete image and depth control give consistent plates every time.
• Eliminate machine downtime due to improperly made or damaged plates.
• Etch thin steel or thick steel in-house instead of outsourcing.
• Eliminate hazardous waste stream.
There is much to know about the CTP technology that is available today and when making a decision on the purchase of CTP equipment, one should be knowledgeable in a few areas that are key to the evaluation process: laser type, software capability, and system features.
Laser Types
To date, there have been three styles of lasers used to make pad printing plates: diode-pumped YAG, Ytterbium fiber laser (YAG wavelength), and CO2. The primary differences between these units are the maintenance required, the spot size, and ability to ablate (etch) various materials.
Maintenance. The diode-pumped YAG has a diode bar that heats up and can warp after about 10,000 hours of use, thereby requiring costly replacement. The fiber laser has no diode bar and therefore, has no maintenance for up to 70,000 hours of operation. The CO2 laser also does not require a significant amount of maintenance.
Spot Size. The wavelength of a YAG laser (1.064 microns) is exactly ten times smaller than the CO2 wavelength (10.64 microns) and therefore, has a resulting spot size that is 10 times smaller than a CO2 (in the same set-up). YAG lasers are able to provide more detailed graphics than CO2 when both laser types are put into the same machine set-up.
Materials. YAG lasers are ideally suited for metals, but their wavelengths are not easily absorbed by many other materials (wood, acrylic, plastics, fabrics, etc.) A CO2 laser beam has much more latitude and can be absorbed easily by many organic materials such as wood, paper, plastics, glass, textiles, and rubber, but is not easily absorbed by metal.
Software
The capability of the laser software is a critical element for producing the high quality pad printing plates that are able to meet today’s demanding quality standards. When lasers were first introduced to make clichés, they were only able to engrave plates with straight “open etch”; they were incapable of engraving bitmap, gradient, halftone, or process images; and they were not able to handle industry standard software.
Three of the main file formats that are used in the industry today are .ai (Adobe Illustrator), .dxf (Corel Draw, Autocad, Flexisign), and .bmp (gradients, process images). It is critical that the laser software is able to handle the latest revision of all of these standard file formats so that any laser plate making system can be seamlessly integrated into the workflow of the target company.
Other critical software parameters that enable the operator to completely control image depth and appearance for the “ideal” laser cliché include dot pattern and depth. The halftone or dot pattern applied to the target image can be programmed in with hatch parameters. The “hatch” or separation between the laser lines is applied to the image and can be varied depending on the type of image. For fine line graphics, a small hatch can be applied; for bold graphics, a larger hatch will prevent “scooping”; and for difficult graphics that combine bold and fine lettering, different hatch patterns can be applied to the same image.
Precise depth control is typically achieved by doing multiple passes of the same image so that a small amount (.0002-3” depending on settings) is removed on each successive pass of the laser. The power and frequency of the laser also can be varied to fine tune the plate depth to provide the best printing plate for the type of ink, production speed, and substrate.
System Features
Computer-to-plate systems have several available features to consider:
• Size of system footprint – stand alone or bench top system
• Micro-adjust focal distance
• Plate registration systems
• Particulate evacuation systems
• Pre-etch laser pointer
• Availability for auto-load
• Availability for future expansion
The selling price of the laser systems in the market today still may be out of reach for some decorating shops that do not produce many plates, but for some of the larger shops that make many polymer plates or for those that outsource many of their steel plates, CTP laser systems can be easily justified. As with any innovation, it is expected that the selling price of these systems will decrease as the computer-to-plate systems become simplified and the technology evolves.
Computer-to-plate systems for the pad printing industry are a natural progression of digital technology and appear to be in a strong position to become the de facto standard for making pad printing plates – they provide pad printing plates of superior quality at a lower cost with faster turnaround.
Benjamin Adner is president of Inkcups Now in Danvers, MA. He has been developing breakthrough equipment and consumable products in the pad printing industry for more than 17 years. For more information, call Inkcups Now at (978) 646-8980 or visit: www.inkcups.com.
