Ultrasonic Welding: Set-up Parameters

by Staff When planning the set-up of an ultrasonic welding job, many aspects of the process must be taken into consideration to obtain the most...

One-on-One Meetings Matter More Than You Know

by Kate Zabriskie, Business Training Works, Inc. There are only two of us in my department. Why should I bother with a formal meeting? We...

Feasibility Studies and Process Development in Plastics Decorating

by Perry Parendo, president, Perry’s Solutions, LLC “Can you put a different finish on this, and change the color of the base material?” These requests...

Staking by Ultrasound – Strong Joints in Short Cycle Times

by Thomas Fischer, head of application development, Herrmann Ultraschalltechnik GmbH & Co. KG; Eric Brückner, Institute of Conveyor Technology and Plastics (IFK); Dr. Michael...
light-shielding

Maintaining a Healthy UV Curing System

by Bob Malone and John Phillips, Miltec UV Is your UV curing system not performing as it should? Are you constantly replacing overheated lamps? Maintaining...

Hot Stamping Plastic Parts – Working with Foils, Dies and Machines

By Jeff Peterson, editor-in-chief, Plastics Decorating The process of hot stamping a three-dimensional plastic part has been around for many years and is one of...

It is Time to Reassess Strategic Assumptions

by Jill J. Johnson, MBA, president, Johnson Consulting Services Today’s business climate is exceptionally volatile and complex. In this type of uncertain environment, it is...

Making the Right Choice – Pad Printing Machinery

by John Kaverman Selling pad printing equipment on a daily basis has perpetuated many unusual questions. It seems that people today, including those in the...

A Single Breath Authenticates Covert Features in New Anti-Counterfeiting Technology

by Scott R. Sabreen, president, The Sabreen Group, Inc. Counterfeiting threatens the world economy and public health through the production of inferior products that circumvent...

Improving Polymer Adhesion: Advancements for Low Surface Energy Plastics Applications

by Scott R. Sabreen, president, The Sabreen Group Many polymers are inherently hydrophobic, low-surface energy substrates that do not adhere well to like or dissimilar...
- Advertisement -
- Advertisement -